Pelican Products 1095 HardBack Case with Foam (1090-020-110)

I purchased the Pelican 1095 HardBack Case with (Pick-and Pluck) Foam to hold a 15-inch retina MacBook Pro.

The laptop fits snugly in the 1095 case when allowing a single row of pick-and-pluck foam inside the non-removable foam border, leaving a total foam padding layer of 2-3cm around the edges of the laptop.

The 1095-CC's liner seems to snugly fit a 17-inch laptop, so purchase the 1095 with pick and pluck foam if you have a smaller laptop.

Pros:

+ quality plastic, less of a military design than previous iteration.

+ discrete.

+ snug fit.

+ easily customizable foam.

+ more waterproof and dust-proof than aluminum briefcases.

+ small form factor.

Cons:

slippery plastic.

no handle, only cheap shoulder pad.

padlock holes are small. It would be nice to have an alternate way to secure the latch for transport without resorting to a padlock.

latch looks like it makes 8 inches of contact but really there are only two 2-inch plastic tabs at either end of the latch plate holding the case shut-the purge valve is in the middle.

no room for charger with 15-inch laptop.

(SPECULATIVE) I worry that over time the plastic latch will wear, but Pelican offers a lifetime warranty.

Bottom Line:

The 1095 is a great solution for protecting your laptop chassis, but you will need additional gear to carry the power adapter and other accessories. The sacrifice of an all-in-one briefcase to hold accessories and laptop is recovered in the 1095's small form factor and better foam cushioning.

3-MONTH UPDATE:

:::More Pros:

+ The shoulder strap has held up and the nylon strap has not slipped through the plastic ladder buckle as I feared. I may upgrade to a ladder lock style of strap buckle.

+ I use a mini carabiner rather than the "Pelilock 1506" or padlock because the mini carabiner provides a tighter fit, although the case could still potentially crack open if it fell. A mini padlock may be ideal in fit but unlocking with a key would consume too much time/effort.

+ I can literally toss the 1095 in the car without worrying about crushing my laptop's screen against its keyboard, knowing that the case will not deform. In the past without the Pelican case, just packing too many things into my briefcase could cause keyboard marks on the screen.

:::More Cons:

The plastic lid will scratch easily, to the point where I feel that the old design with two ribs running down the front would better serve scratch protection.

The 1095 may be too big to fit into a carry-on backpack for airline usage, so the 1085's tighter fit might be better for flying.

:::More Bottom Line:

I still feel that this case is better than purchasing a metal briefcase, because the Pelican is slick and covert.

Yes it protects you computer from everything but, it dosent fit in any of my bags efficiently or at all and the cary strap option sucks. It is such a hassle that I've just been putting my computer straight in my backpack. I would strongly recommend the bigger case with handle.

Buy Pelican Products 1095 HardBack Case with Foam (1090-020-110) Now

It fits my Macbook pro 15.4 early 2011 very well. I highly recommend the "1095 pick-and-pluck foam" model over the "1095CC(Computer Case)". I feel that a custom cut case for your laptop

offers more protection than a universal laptop case, also with the ("1095 Pick and pluck" Model you can store a 13" laptop in it safely, by utilizing the leftover foam). I believe this case would

also fit some 17" laptops. There are some draw backs to this case though. First, it is heavy, though it is worth the extra weight. Second, It scratches easily. Third, This WILL NOT fit in a

messenger bag or backpack, I read some reviews online that said otherwise, but it would have to be a very large backpack. Lastly, there is no room for a wall charger.

I still firmly believe these minor drawbacks are worth the inconvenience for this level of protection though.

Read Best Reviews of Pelican Products 1095 HardBack Case with Foam (1090-020-110) Here

The Pelican 1095 case is made to fit 15" laptops, such as the MacBook Pro 15 (there are other models available for 13" and 17" laptops). It comes in two configurations: the 1095CC, which has a pre-molded foam interior, and the "standard" 1095, which comes filled with "pick and pluck" foam. I am told that the molded foam interior leaves slightly too large a space for a MacBook Pro 15, so that it rattles around a bit inside the case. I got the pick-and-pluck foam, which is basically a slab of foam precut into half-inch squares; you can then measure how big and what shape a hole you want for your item, and then cut or pull out squares to create exactly the space you need. As it happens, with this foam you can get an almost perfect fit for a MacBook Pro 15.

The case is sturdy, has a gasket and closes securely, you could likely throw it into the open ocean for hours without water leaking in and damaging your computer (although this is not a test I am willing to do myself!). This is not a true briefcase though, there is no handle, just a web shoulder strap. Still, the case is sleek and elegant and would not be out of place in a boardroom.

The case is by necessity larger than the computer adds about two inches to each dimension so it will not be as easy to stow in a knapsack or shoulder bag. But if you absolutely, positively need a 100% jump-in-the-water-proof case, this is the one you want.

Want Pelican Products 1095 HardBack Case with Foam (1090-020-110) Discount?

Bought this case for my Sager NP8130 and it fits very well...snug enough to hold it in place with no wiggle room yet it closes without squeezing the laptop too much. It also doesn't add too much to the original size of the laptop so it still fits in a carry on bag. I highly recommend it!

Save 44% Off