Buy C2G / Cables to Go 54203 DisplayPort 1.1 Cable with Latches (7 Meters/22.96 Feet) Now
At first sight, this appears to be a high quality cable.However this is NOT YOUR STANDARD DisplayPort cable.
This DisplayPort Cable has the #20 pin power connector enabled. Which means it feeds power back and forth from monitor to video card.
You don't need the #20 pin connected, as both your monitor and computer already have a power source. As far as my reading took me, having this #20 pin connected is not an industry standard.
I had a lot of problems with this and you can verify this with other posts on the internet.
My particular symptom was that if I turned my computer off, it would not boot again if the displayport cable was plugged in. I had to unplug the cable, and wait for windows to boot, then plug it back in, very annoying!
I am not aware of any situation where a DisplayPort cable with the #20 pin present wouldnt be useful, but maybe it is?
LEARN FROM MY LESSON, BUY A HIGH QUALITY BRAND NAME CABLE INSTEAD!!!Worked as expected and advertised. Having never used one of these cables before, I was surprised to find they're quite stiff and not easily made to comply. This may figure in to your purchase decision on length.
Want C2G / Cables to Go 54203 DisplayPort 1.1 Cable with Latches (7 Meters/22.96 Feet) Discount?
Not sure if my PC's port is under powered or if the cable is defective, but I could not get it working. Yes, it puts out the image to the display but it often flickers and the display was not steady. Had to revert to the 6 ft cable I previously was using. This one went to my junk box. I still need a longer cable butam reluctant to buy because I am not sure if it was this particular cable or if there is a length limitation to the display port cables.
No comments:
Post a Comment