I owned a projector about 7-8 years ago. It was very expensive back then (Infocus brand) and I always thought it had a great picture in our dark basement setting... but the output was not bright enough to work in a semi-lit room during the day. When the bulb finally burnt out and I realized how expensive they were to replace, I got rid of it and bought a 42" Sony rear-projection TV. I have been happy with the Sony for the last 7 years or so but just moved from a large house into a smaller apartment and was looking for a way to free up all the space that this rather large TV took up (not to mention it is almost impossible to move because it is so big and heavy). I was looking into the newest technology of LCD, Plasma, and even LED TVs and the prices are pretty crazy for the size you get. I remembered how cool it was to have a projector and I thought to myself that would be great to save space and get a HUGE screen. I looked into them and I knew from my prior ownership that anything over 2000 lumens was typically considered to be bright enough to use in a semi-dark room. Most of the projectors advertised and sold as "Home Theater Projectors" are just as expensive as the TVs and I understand that they have native resolutions of 1280x800 or higher and some I have seen as high as 5500 lumens.... but I think a lot of it is hype. How black can the blacks in the video get? Why do you need a 60,000 to 1 contrast ratio? If you are not going to project the image 100 feet or more, why do you need that many lumens? I took a chance on this projector because I found it brand new on ebay for less than four hundred dollars and thought what the heck. At 2800 lumens it is plenty bright (even in daylight) to be seen clearly. The picture looks razor sharp and all my friends that spent thousands on big screen TVs are all jealous and say it looks better than their TVs. For 1/8 or less the cost, I have a 75" screen that is 1080i and 720p compatible. It is awesome for movies or ball games. Everyone always wants to have the superbowl party at my place.Compared to my old Infocus projector, I can see technology has come a long way. This Optoma projector is very compact, lightweight, and quiet. It does put out a fair amount of heat (exhaust fan) but other than that I have absolutely no complaints, nor do I see a reason to spend thousands more on a big screen TV or "Home Theater" projector. In fact, this projector is actually TOO bright for the 10' that I am projecting the picture so I turned it down to "eco-mode" which dims it a bit and saves another 1,000 hours on the bulb. For the money, I think you would be very pressed to find a better quality projector with higher lumens and resolution for anywhere close to the same cost. The replacement cost of the bulbs are under $200 each so I can rest assured that this projector will last me the rest of my happy life, and even if it wasn't affordable to replace the bulb. At 350 dollars, I think 240,000 minutes of watching this screen is well worth the money I paid for it. That is 8 cents per hour.
Bottom line: Incredible Hi-Def picture, compact space-saving design, bright enough for daytime viewing, and very cost affordable. If you are considering this projector compared to some similar models, you have my recommendation to go with this one. I checked out Dell, NEC, Hitachi, Epson, and Infocus and nothing in this price range compared. 2800 lumens and 3000:1 contrast ratio is pretty impressive. Deep, rich dark colors... True blacks... and bright whites. I think you will be as happy as I am.
I will post some pictures as soon as I get my screen installed. Right now I am just projecting on a (brown) wall. I can't even imagine how good the picture is going to be on a real screen!
Buy Optoma PRO150S 2800 Lumen SVGA DLP Multimedia Projector Now
Worked for nearly a year without issues. One fine day the power will not turn on. Helpdesk explained that board might have got burnt with a voltage spike, that none of my other devices had issues. I see endemic problems with other Optoma projector as well, after I invested my money in this. To return to Optoma Service across the continent will take as much as what a new one is worth and the one time cost. I am looking for other alternatives. 300 plus dollars vaporized.Read Best Reviews of Optoma PRO150S 2800 Lumen SVGA DLP Multimedia Projector Here
I paid $800 on a projector that worked about 5 or 6 times. After that, it had vertical lines and no picture. The packaging is still on the projector, but we were in Asia and did not return until after the warranty. I called Optoma and spoke to the manager. My frustration is paying so much money for a defective projector. I would think they company would care about their reputation and customer enough to do something. His response was that they have no idea how many times we have used it. It is obvious by looking at it that it has not been used. The kinks are still in the power cord and the plastic is still on top of the projector. He said that it was probably a defective "main board" which is $279 and $100 labor. He would give me 50% off, but I pay for mailing, etc. Now I have to decide if it is worth it to pay another $300 on a cheap product that might last only a few months again. My observation: Optoma is poorly made and the company does not care about their reputation.Want Optoma PRO150S 2800 Lumen SVGA DLP Multimedia Projector Discount?
We have had this product and needed to replace it. This was a great value for us, and a dependable product
No comments:
Post a Comment