Saturday, March 8, 2014
Tripp Lite P502-010-RA 10ft SVGA / VGA Monitor Extension Cable with RGB Coax Gold HD15M / Right-ang
I needed this to hook old emachines to new flat screen tv which had pc plug on back. It was the correct pin number and long enough to reach . It works great.If you remove (temporarily), the thumb screws from the right angle end, the connector will fit through spaces that a normal VGA end will not. I used this cable to run the VGA signal to my TV that is hanging on an articulated arm that has a space about two inches in diameter to run cables through. I now have this cable, the power cord, one RG6 cable, all of the Wii (original, not U) cables, and four right angle HDMI cables all neatly routed through the bracket.I needed a VGA cable that would fit through a cable hole that a conventional connector would not fit through. This one went through perfectly and performs perfectly. It connects my ASUS laptop PC to our 60" Sharp video conference TV.Seems to be very well built. I used this to mount a TV monitor on the wall, and the 90 degree connector allowed this. However, the cylindrical bulges near both ends stick out too much, and kept the monitor from mounting flush to the wall, so I had to trim them a little with a knife blade (which worked OK, and was quick; to make it 1/4 inch thinner).It works like a Charm. I am kind of xtreme with the order of my computer cables, hate the hanging cables, stuff like that, my laptop does not receive a docking so I have to buy angled wires. Thumbs up.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment